Frost Chill Air: Heating and Cooling From One Plug-In Unit
A cold bedroom in winter, a stifling home office in summer, and a thermostat that changes the temperature of rooms nobody is standing in. Frost Chill Air is built to heat or cool the room you are actually using — no drilling, no permanent installation, no special wiring.
- ✓2-in-1 heating and cooling modes in a single unit
- ✓PTC ceramic heating reaches full output in about three seconds
- ✓PowerFlow Airflow™ spreads air more evenly across the room
- ✓Touchscreen controls plus a remote — adjust it from the sofa
- ✓Built-in timer and quiet operation designed for night-time use
- ✓30-day money-back guarantee on every order
You will be redirected to the order page, where current price, discount, shipping and availability are shown.
Heat & Cool
PowerFlow Airflow
No Installation
Remote + Touchscreen
Performance figures, review counts and ratings shown on this page are as reported by the product supplier. Individual experiences can vary.
Comfort for the Room You Are Actually Using
Central systems condition the whole house to fix one cold bedroom. Fixed air conditioning means a contractor, a wall, and a landlord's permission. Basic fans and heaters each solve half the year. Frost Chill Air takes a different route: one portable unit, both modes, plugged into an ordinary outlet.
Whole-home systems
Turning up the thermostat conditions rooms nobody is in. Frost Chill Air is designed to deliver targeted heating or cooling wherever it is placed, so you treat the space you are actually occupying.
Fixed installations
Split systems and window units mean drilling, mounting, brackets and a contractor's schedule before you feel a single degree of difference — and they are often off the table in a rented home.
Single-season appliances
A basic fan only moves air and a basic heater only warms it, so you end up storing one of them for half the year. Frost Chill Air covers both sides with one unit and one plug.
Everything Frost Chill Air Puts in One Portable Unit
These are the features presented on the Frost Chill Air product page — heating, cooling, airflow, controls and safety, in a unit you can move from room to room.
🔥 Fast PTC ceramic heating
The product page states that the ceramic heating system reaches full output in about three seconds. No long warm-up period before the room starts to feel different.
❄️ Cooling mode
When the room runs too warm, switch to cooling mode and direct the airflow where you want it — at a desk, a sofa or the side of the bed.
💨 PowerFlow Airflow™
A high-powered blower paired with a perforated grille is designed to distribute air more evenly across the room, rather than aiming a narrow stream at one spot.
🎛️ Touchscreen and remote
Onboard touchscreen controls handle mode, temperature and timer, and the included remote lets you change all of it without getting up.
🕒 Built-in timer
Schedule operation so the unit runs around your routine — warming the bedroom before you get up, or shutting itself off after you fall asleep.
🛡️ Built-in safety features
The product page highlights integrated safety features for everyday use, alongside quiet operation intended for bedrooms and overnight running.
Get Started in Three Steps
No brackets, no window kit, no electrician. Frost Chill Air is designed as a plug-in unit from the start.
Place it
Position the unit on a stable, suitable surface in the room where you want added comfort — bedroom, office, living room or guest room.
Plug it in
Connect it to a suitable standard wall outlet. No special wiring, no drilling and no electrician involved.
Choose your mode
Use the touchscreen or the remote to select heating or cooling, set the temperature and set the timer. That is the whole setup.
Two Modes, One Unit, All Year
Most people own a heater for winter and a fan for summer, and half the year one of them takes up storage space. Frost Chill Air combines both: PTC ceramic heating for cold months and a cooling mode for warm ones, selected from the same touchscreen.
- ✓Heating and cooling modes in the same portable unit
- ✓PTC ceramic system reaches full output in about three seconds
- ✓Switch modes from the touchscreen or the included remote
- ✓One appliance to store instead of two seasonal ones
Nothing to Install, Nothing to Drill
Fixed heating and cooling means brackets, holes in a wall, a window kit and a contractor's quote. Frost Chill Air is designed to skip all of it: set it down, plug it into a standard outlet, and pick a mode. That also makes it workable in rented homes where fixed installations are not allowed.
- ✓No drilling, mounting or permanent installation
- ✓Runs from a suitable standard wall outlet — no special wiring
- ✓Suited to many rented spaces with no fixed changes
- ✓Move it between rooms as the day and the season change
Quiet Enough for the Bedroom
An appliance that keeps you awake is not much use at 2 a.m. Frost Chill Air is designed to run with reduced operating noise for bedrooms and overnight use, and the built-in timer means it can shut off or start up on its own instead of running all night unattended.
- ✓Quiet operation intended for night-time and bedroom use
- ✓Built-in timer to schedule operation around your routine
- ✓Remote control for adjustments from the bedside
- ✓Integrated safety features highlighted for everyday use
Frost Chill Air at a Glance
The key specifications as presented on the Frost Chill Air product page.
Frost Chill Air vs. the Usual Setup
Off during this limited-time promotion
Installation cost — it runs from a standard outlet
Seasonal appliances replaced by one unit
How Frost Chill Air Compares
A feature-based comparison using the characteristics highlighted on the product page. Basic appliances vary widely by model, so "varies" is used where a feature is not standard across the category.
| Feature | Frost Chill Air | Basic Space Heater | Basic Fan | Fixed AC Unit |
|---|---|---|---|---|
| Heating and cooling | ✓ | Heating only | Airflow only | Varies |
| No permanent installation | ✓ | ✓ | ✓ | ✗ |
| PTC ceramic heating | ✓ | Varies | — | — |
| Remote control | ✓ | Varies | Varies | ✓ |
| Touchscreen control | ✓ | Varies | Varies | Varies |
| Built-in timer | ✓ | Varies | Varies | ✓ |
| Moves between rooms | ✓ | ✓ | ✓ | ✗ |
| Suitable for rented homes | ✓ | ✓ | ✓ | ✗ |
What Frost Chill Air Users Are Saying
The product page states that Frost Chill Air is rated Excellent based on 3,758 reviews.
"I love that Frost Chill Air doesn't need any installation. I plugged it in, chose the setting and started using it in my bedroom right away."
"The cooling feature has been helpful in my home office. It makes the room feel more comfortable without changing the whole house."
"I like that it has both cooling and heating modes. It feels useful for more than just summer when the temperature changes."
Testimonials are supplied by the product provider and reflect the individual experience of each customer. Individual results may vary.
30-Day Money-Back Guarantee
The Frost Chill Air product page states that purchases are covered by a 30-day money-back guarantee. Try it in the room that actually bothers you — the cold bedroom, the stuffy office — and see whether it makes a difference. Check the current order page for return instructions, eligibility and applicable conditions.
VIEW THE CURRENT OFFER →Frequently Asked Questions
Does Frost Chill Air heat and cool?
Yes. The product page presents Frost Chill Air as a 2-in-1 unit with both heating and cooling modes, so the same unit can be used in colder periods and when a room becomes too warm.
Does it require installation?
No permanent installation is required. The unit is designed to be placed on a suitable stable surface and plugged into a standard wall outlet. No drilling, mounting or special wiring is involved.
How quickly does the heater warm up?
The product page states that the PTC ceramic heating system reaches full output in about three seconds.
What is PowerFlow Airflow™?
PowerFlow Airflow™ is the name the product page gives to the combination of a high-powered blower and a perforated grille, which is designed to distribute air more evenly across the room instead of aiming it at a single spot.
Can I control it remotely?
Yes. Frost Chill Air includes onboard touchscreen controls plus a remote control for changing modes, temperature and timer settings without getting up.
Can I use it overnight?
The product page promotes quiet operation suitable for night-time use, and a built-in timer lets you schedule when the unit runs. As with any electrical heating appliance, follow the manufacturer's operating and safety instructions.
Is it suitable for a rented home?
Because there is no fixed installation, no drilling and no window kit, the unit is suited to many rented spaces. Check your own tenancy agreement for any restrictions on appliances.
What guarantee is offered?
The product page states that Frost Chill Air is covered by a 30-day money-back guarantee. Check the order page for the latest return instructions, eligibility and applicable conditions.
Heating and Cooling Without Permanent Installation
Two modes in one unit. PTC ceramic heat in about three seconds. PowerFlow Airflow™, touchscreen, remote and timer. Quiet enough for a bedroom, portable enough for any room, and backed by a 30-day money-back guarantee.
VIEW CURRENT FROST CHILL AIR OFFER →